If you are not able to edit, delete, or add any data to your SD card, it means that your card is stuck in read-only mode. While memory cards can be manually configured to read-only mode, there are times when this setting is inadvertently triggered or causes errors. So how do you fix SD card showing as read only mode? This is a big problem for someone, but don’t worry we are here to solve this error. In this article, we have collected all the common fixes that you can try when your SD card is stuck on read-only mode.

Why is your SD card set to read-only?

Perhaps your SD card is in read-only mode for some reason, which you can simply change with a switch – or something more difficult. Nonetheless, knowing the underlying cause will help you solve the SD card read-only issue efficiently.

Here are some common reasons why your SD card remains in read-only mode:

  • Write-proof switch: Check the card for a small lock switch. If the toggle is turned on, it forces read-only mode.

  • Software Settings: Some devices or settings may restrict writing for security.

  • Corrupted data: Interruptions or malfunctions can damage the file system, leading to read-only access.

  • Card damage: Mishandling, moisture, or extreme temperatures may cause hardware failure and read-only mode.

How to Fix SD Card Showing as Read Only?

After understanding the reasons, it can be very simple to fix SD card showing as read only mode. Here are some solutions you can try depending on the cause of the read-only problem:

Method 1: Examine your SD card’s switch.

Imagine your SD card like a book. A write-protection switch is like a lock that keeps the book from getting new things written in it. When the lock is on (usually “DOWN” position), only reading is allowed.

To unlock the book and write new things, find the switch on your SD card (it might look like a tiny button or slider with a lock symbol). Make sure it’s not in the locked position, usually “UP”. Then, you can add stories and pictures to your SD card like a normal book!

Remember, not all SD cards have this lock, so if you don’t see a switch, don’t worry!

Method 2: Look for system issues on your SD card.

If you’re using Windows and your SD card is stuck in “read-only” mode, there’s a tool that can help! It’s called the “Error Checking” tool, and it can fix your SD card showing as read only problems.

Here’s how to use it:

  • Plug your SD card into your computer.

  • Open “File Explorer” (it looks like a folder icon).

  • Find your SD card in the list of drives on the left side.

  • Right-click on your SD card and choose “Properties”.

  • Click on the “Tools” tab.

  • Under “Error checking”, click the “Check” button.

  • Follow the tool’s instructions. It will scan your SD card and try to fix any problems.

That’s it! Hopefully, your SD card will be back to normal after this.

Method 3: Use CMD to remove read-only properties.

If you want to fix SD card showing as read only mode using CMD, follow the below steps:

  • Step 1: Open “Command Prompt” like a boss (with “Admin” powers!).

  • Step 2: Tell Command Prompt to use its special tool called “Diskpart” by typing diskpart and pressing Enter.

  • Step 3: Make a list of all drives by typing list disk and pressing Enter. Find your SD card’s number on the list.

  • Step 4: Choose your SD card by typing select disk x (replace “x” with your SD card’s number) and pressing Enter.

  • Step 5: Tell Command Prompt to unlock your SD card by typing attributes disk clear read-only and pressing Enter.

  • Step 6: (Optional) Check if it worked by typing attributes disk and pressing Enter.

  • Step 7: Say goodbye to the Command Prompt by typing exit and pressing Enter.

Now your SD card should be unlocked and ready to play!

Method 4: Modify the policies for storage devices.

If the other tricks didn’t work, this one involves tinkering with special computer settings called “Group Policy.” These are like hidden rules that control how certain things work. This is for advanced users only!

Here’s the simple version:

  • Open “Local Group Policy Editor” (search for it in Start).
  • Go to “Computer Configuration” > “Administrative Templates” > “System” > “Removable Storage Access.”
  • Turn OFF these switches:
  • Deny all access.
  • Deny reading files.
  • Deny writing files.
  • Deny running programs.

Remember, this is for expert users. If you’re not comfortable with these steps, maybe skip this trick and try something else.

Method 5: Format your SD card.

If your SD card isn’t working right, and nothing else fixed it, you can try “wiping it clean” (formatting). This will erase everything on it, so make sure you have backups!

To format on a Computer:

  • Plug your SD card into your computer using a reader.
  • Open File Explorer and find the card.
  • Right-click the card and choose “Format.”
  • Pick the right file system (usually FAT32 or exFAT) and click “Start.”

To format on an Android phone:

  • Open Settings > Storage > SD card.
  • Choose “Format” (might be in a menu).
  • Remember, formatting deletes everything! Back up your files first!

That’s it! Hopefully, your SD card is no longer stuck in “read-only” mode. By following these methods you can successfully fix your SD card showing as read-only mode.



Brief Overview on Fix SD Card Showing as Read Only

Looking for solution of Fix SD Card Showing as Read Only ? It is one of the major issues which almost every users might have come across at any instance of their life. Digital photos and videos can get accidentally deleted or might get corrupted due to any specific error. In such situation, previously stored files cannot be accessed further. At this juncture, there arises the need for Photo recovery Software. It is one of the most proficient utility which has been designed to accomplish Fix SD Card Showing as Read Only issues conveniently. It is best tool to recover corrupted, deleted, missing, formatted and inaccessible images and videos from digital camera or any other storage devices. It has been exclusively designed by the professionals to rescue photos as well as videos and overcome memory card corruption issues irrespective of its cause.

Fix SD Card Showing as Read Only: Reasons Why Photo Becomes Inaccessible

Photos become inaccessible and user may lose their valuable pictures from storage device, due to following reasons:-

  • When stored images get deleted accidentally then Fix SD Card Showing as Read Only can be faced.
  • If you have formatted your drive.
  • Due to severe virus attack.
  • Improper handling of device.
  • Due to file system corruption.
  • Due to physically damaged media.
  • Header file corruption.

Apart from above mentioned reasons, there can also be some other possibilities due to which need for Fix SD Card Showing as Read Only solution arises for users. Unfortunately, if you are facing loss of photos due to any of the above mentioned reasons and do not have a valid backup then it is better to opt for Photo Recovery Software to resolve Fix SD Card Showing as Read Only issues in the mean time.

 Avoid Common Mistakes to Prevent Fix SD Card Showing as Read Only issues for future

One silly mistake or slight carelessness is enough to erase all the memorable and exciting moments of past. It is rightly said “Prevention is always better than cure”. While most of the problems related to Fix SD Card Showing as Read Only have solution, But it would be better not to confront it by taking some measures. Therefore, users are advised to take care of the following points mentioned below if they do not want to be in horrible situation of Fix SD Card Showing as Read Only which can be quite messy at times.

  • Never remove the memory card when it is in use.
  • Always safely remove the memory card before removing it from its slot.
  • Do not click pictures or record videos when battery is running low to avoid Fix SD Card Showing as Read Only.
  • Always be careful while erasing unwanted files
  • avoid using “Delete All” button of Digital Camera
  • Do not mishandle digital camera or memory card.

Note: Avoid using Memory Card if you have deleted any photos and videos from it. Doing so will prevent the possibilities of overwriting and replacing the data on the card. Once overwritten, option for rescue data in case of Fix SD Card Showing as Read Only will be next to impossible.

Best Solution for Fix SD Card Showing as Read Only

Photo Recovery Software is one of the robust and advanced tool which has the ability to rescue lost or deleted pictures/videos. It has been designed by working professionals who have large experience in this field. The software has strong scanning technique and all latest features, which can easily resolve Fix SD Card Showing as Read Only and restore photos and videos. It scans your storage device deeply and detect all missing files. After that it provides facility to see preview of recoverable items and restore them wherever you want to for quick access. Today it has numerous satisfied users throughout the world, who have tried it in order to fix Fix SD Card Showing as Read Only issue. Not only that it has also some amazing features which makes it popular in photo recovery segment. However it can be said that it is the only secure way, which provide complete and instant solution for Fix SD Card Showing as Read Only in very less time without losing a single photo during recovery. Therefore one can rely on the software to get satisfying and impressive results.



Benefits of Using Photo Recovery Software for Fix SD Card Showing as Read Only

  1. It is capable of resolving Fix SD Card Showing as Read Only and recover lost, deleted and damaged photos, videos on memory card.

  2. Has the potential to recover even severely damaged files as well as formatted memory card.

  3. Compatible with both Windows and Mac OS.

  4. Easily recover JPEG, PNG, TIFF, MOS, PSP, PCT, JPG, GIF, BMP etc files and fix Fix SD Card Showing as Read Only.

  5. Also restore deleted or damaged audio, video and other multimedia files in convenient way.

  6. Provide facility to add file headers in the list of photo, audio, video items by just Drag and Drop method.

  7. Generate preview of recoverable files before saving it.

  8. User friendly GUI for easy navigation.

  9. Having different scanning options like, Advance, Quick, Full scan.

  10. Compatible with all Mac OS X as well as Windows operating system.

  11. Supports different Mac or Windows versions like Mac OS X Tiger, Lion Leopard, Panther and Windows Vista, 7, 8 etc respectively.

  12. Supports different file system such as HFSX, HFS, HFS+, NTFS, FAT etc.

  13. Able to undelete images from memory card to overcome Fix SD Card Showing as Read Only on storage devices such as Micro SD, CF, XD card, SDHC etc.

  14. Supports all digital camera, mobile phones, tablets etc.

  15. Restore photos from system hard drive, emptied recycle bin or un-bootable volume.

  16. Provide complete solution for Fix SD Card Showing as Read Only even without having technical skills.

  17. Available as free trial and licensed version.

These are few prominent features of Photo Recovery Software best in this class. If you want to overcome Fix SD Card Showing as Read Only issue, then without any delay try this amazing tool and get desired result.

Limitations of the Photo Recovery Software to Overcome Fix SD Card Showing as Read Only Issue

Although Photo Recovery Software is one of secure way to cater the need for Fix SD Card Showing as Read Only solution in very less time. However, users should know about its limitations which are discussed below :-

  • Demo version provides with the preview of the deleted and corrupted photos and videos.
  • Users have to avail licensed version in order to recover deleted or lost photos and overcome Fix SD Card Showing as Read Only.

System Requirement for Photo Recovery Software

For Windows

  • Processor:- Pentium Class.
  • Operating System:- Windows Vista, Windows7, 8 etc.
  • Memory:- RAM 1 GB.
  • Hard Disk:- 100 MB free space.

For Mac

  • Processor:- Intel(G5 or its later version)
  • Memory:- RAM should be at least 1 GB.
  • Hard Disk:- Free space should be 100 MB.
  • Operating System:- 10. 4 Tiger, 10.5 Leopard, 10.6 Snow Leopard, 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks or any other latest Mac OS X.


User’s Guide to Resolve Fix SD Card Showing as Read Only: Follow Step by Step Wizard to Run the Software

Step:1 Download and install Photo Recovery Software to accomplish Fix SD Card Showing as Read Only issue

Step:2 Once installed, launch the program by double clicking on the icon present on the desktop.

Step:3 Connect the storage device that need to be scanned with the PC.

Step:4 Once connected, the program will automatically detect the storage device which has been plugged.

Step:5 Click on the Scan button to initiate the scanning process. Be sure to choose the exact file type from the list for quick search.

Step:6 Once the scanning is completed, you will get the preview of the files that has been deleted, corrupted. Select the file to be restored and saved on the desired location on the computer. However, you need to have the licensed version of the software for accomplishing Fix SD Card Showing as Read Only task.

Step 7: Finally, a progress bar will appear that shows the ongoing process of storing photos and videos to the desired location and overcome Fix SD Card Showing as Read Only